Netgear Nighthawk AC1900, EX7000-100INS Wi-Fi Range Extender

Getting your Trinity Audio player ready...

• Dual-band Wi-Fi with a speed of up to 1900 Mbps and a coverage area of up to 10,000 square feet

• High-powered 700mW design for maximum range

• For maximum Wi-Fi performance, a dual core 1GHz CPU is used.

• 5 gigabit ports for connecting wired devices to Wi-Fi, such as smart TVs and game consoles

• USB 3.0 allows you to access your saved material up to ten times quicker.

• To play your media on TVs and gaming consoles, you’ll need a DLNA server.

• With the Wi-Fi Analytics app for Android, you can optimise your Wi-Fi network.

• External antennas and high-powered amplifiers extend range.

Because of its dual-band 802.11ac Wi-Fi, the Netgear EX7000 should be able to expand or replace your existing wireless network no matter where you put it. There was no area on our office floor where the signal went below three bars when the extender was put on a desk. One of the most popular Wi-Fi boosters for large households is the Netgear Nighthawk EX7000. With maximum upload and download rates of up to 1900 Mbps and dual-band capabilities, it significantly outperforms any other Wi-Fi booster in its class.

At the back of the Netgear AC1900 Back, you’ll find five Gigabit Ethernet ports, which are excellent for connecting local PCs or home entertainment devices (such as a game console or a TV) to the router for a more reliable connection. The range extender also has a USB 3.0 connector, which may be used to turn it into a tiny networkable media device or even a print server.

The EX7000 supports two wireless bands, spread out over 2.4 and 5GHz, with the first being ideal for gadgets that don’t always require high speeds and only require a maximum of 600Mbps, and the second being ideal for home devices that require high speeds, such as computers, gaming consoles, and TV-based machines.

Boost Your Existing WiFi

1. Increase the speed of dual-band WiFi to 1900Mbps and decrease interference.

2. Antennas on the outside for greater WiFi coverage and speed

3. Gigabit Ethernet Ports (5 Gigabit Ethernet Ports) – Connect a wired device to your WiFi network, such as a Blu-ray player, gaming console, or smart TV.

4. Extend an existing WiFi connection or establish a new AC WiFi access point with two WiFi modes.

5. FastLane Technology — Combine both WiFi bands to create a single super-fast connection that’s excellent for HD streaming and gaming.

What is the Netgear EX7000 Nighthawk Mesh Extender’s procedure?

• The W.P.S technique is used to configure the Netgear EX7000.

• Connect the EX7000 to your network or WIFI modem.

• Wait for the extender’s power to illuminate.

• On the extender, push the W.P.S button.

• Then, on your primary router or modem, press the W.P.S button.

• A blinking green light will appear on the extension and router. If the problem persists, press the W.P.S button once more.

• Wait 2-3 minutes for the Netgear AC1900 to turn on all four steady led lights.

• Go to www.mywifiext.net and click Complete to finish the W.P.S procedure of Netgear AC1900 setup.

Netgear EX7000 Extender Setup

The Netgear EX7000 extender setup extends your WiFi network’s coverage for optimal WiFi output across your home. With a dual bandwidth, the Netgear EX7000 can cover up to 100-150 feet once it boots.

The EX7000 may be set up as a wireless extender to increase the range of an existing wireless network.

The following is how to set up a Netgear AC1900 wifi extender with wireless-enabled devices:

1. Wait for the green light to come on after plugging the Netgear Ex7000 Setup into a power outlet.

2. Take out your wireless-enabled device, such as your phone, PC, or Kindle.

3. Go to your wifi device’s settings menu.

4. Connect to the Netgear_ext network by clicking on Wifi.

5. Now type mywifiext.net into any web browser.

6. Create a login account by clicking the NEW EXTENDER SETUP option.

7. Install your fresh new Netgear EX7000 by following the instructions.

EX7000 AC1900 Mbps Netgear Nighthawk Wi-Fi Range Extender (Black, Dual Band)

The most crucial component for streaming, gaming, and web access is home Wi-Fi. The NETGEAR Nighthawk AC1900 WiFi Range Extender expands the range of your current network with FastLane technology and dual band WiFi up to 1900 Mbps.

Range & Performance

Your router may not be able to cover every section of your house due to distance, obstructions, or bandwidth limitations. This range extender features a dual core 1 GHz CPU, 700 mW amplifiers, and three external antennas for enhanced signal range and coverage.

Connectivity

You may use the 5 Gigabit ethernet ports to connect devices like game consoles, streaming players, and smart TVs, and upgrade them to a faster ac connection for uninterrupted gaming and streaming. This range extender has a USB 3.0 connection for up to 10 times faster access and a DLNA server for media streaming to TVs and game consoles.

Up to 100 Percent Faster

802.11 ac technology and a fast 1 GHz dual-core CPU provide Wi-Fi speeds of up to 1.9 Gbps. This range extender has a coverage area of up to 929 square metres.

There will be no more dead zones.

You may increase the range of your current Wi-Fi network without having to replace it with this range extender. You may use Access Point mode to transform a regular Ethernet connection into a WiFi hotspot.

Firmware Update | Netgear EX7000 Setup

• First and foremost, turn on the Netgear Nighthawk EX7000 AC1900 WiFi extender.

• Connect the router to the extension.

• After you’ve completed deploying a web application in the manner you choose.

• In the address bar, type mywifiext.net , then click the key to enter it.

• To access your extender, use your username and password.

• Select Update Firmware from the menu options.

• After that, select the Review option.

• If a new firmware version is available, click the yes button to update the programme.

• Wait a few minutes for Netgear AC1900 to finish updating its firmware.